Wall Angle
Unit of Measure

Specifications

Brands

N/A Gordon

Grid Member Material

N/A Aluminum

Grid Member Width

N/A 2 in

Grid Member Finish

N/A Clear Anodized Powder Coat White

Type

N/A Wall Angle

Threaded Rod Size

N/A 1/4-20

Material

N/A Aluminum Alloy 6063

Industry Standards/Certifications

N/A FM Approved

Web Depth (A)

N/A 2-1/32 in

Flange Width (B)

N/A 1-1/4 in

Length

N/A 12 ft

Weight Per Linear Feet

N/A 0.54 lb

Pieces per Carton

N/A 12

Linear Feet per Carton

N/A 144

WS Components and Accessories

N/A 2-Way Corner Connector 3-Way Connector 4-Way Connector Blank Panels DS-cross Tee Filter Modules Hold Down Clips Lights-Tear Drop Main Tee Splice Connector Perimeter Trim Rod/Turnbuckle Sprinkler Adapter Panel WS-20 Main Tee WS-20 Perimeter Angle WS-20 Perimeter Tee

WS Load Table

Hanger Spacing (Span) for Deflection Formula L/360

N/A 24 in48 in

Main Tee Spacing for Deflection Formula L/360

N/A 48 in

Maximum Point Load for Deflection Formula L/360

N/A 296 lb629 lb

Maximum Uniform Load per Linear Feet for Deflection Formula L/360

N/A 74 lb314.5 lb

Applied Load per Square Feet for Deflection Formula L/360

N/A 18.5 lb78.6 lb

Deflection at Mid-Span for Deflection Formula L/360

N/A 1/16 in1/8 in

Hanger Spacing (Span) for Deflection Formula L/180

N/A 48 in

Main Tee Spacing for Deflection Formula L/180

N/A 48 in

Maximum Point Load for Deflection Formula L/180

N/A 314 lb

Maximum Uniform Load per Linear Feet for Deflection Formula L/180

N/A 78.5 lb

Applied Load per Square Feet for Deflection Formula L/180

N/A 19.6 lb

Deflection at Mid-Span for Deflection Formula L/180

N/A 1/4 in

Technical Information

Extrusions

N/A Grid members shall be extruded of aluminum alloy 6063, with temper T5, and shall feature upturned flanges to create a channel to receive the filter sealant gel, and a continuous 1/4-20 screw boss for field attachment of connecting and suspending devices. Cross tees shall have ends which are factory back cut and coped for optimal face alignment and system strength.

Finish

N/A Standard finishes are either clear anodized or white powder coat. Custom finishes are also available.

Light Fixture Compatibility

N/A Teardrop fixtures: Gordon's WS systems are designed to mate perfectly with standard 2-inch teardrop light fixtures. For greatest ease of installation, consider the Gordon WS-ScrewSlot extrusion.

Custom WS Blank Panels

N/A When required, Gordon can provide blank panels with downturned knife edges to mate with the WS grid gel channel. Corners are welded and sealed, and are finished to match the WS grid members.

WS-ScrewSlot Grid

N/A When utilizing in-room utility/process pipe racking or teardrop light fixtures with 2-inch grid, consider the WS-ScrewSlot or the fastest, simplest, and cleanest installation alternative. Featuring a 1/4-20 continuous screw boss in the room side surface of the main tee, the WS-ScrewSlot extrusion allows for fast easy attachment of fasteners, rack attachments or teardrop light fixtures. And no drilling is required, eliminating any potential leak path into the cleanroom from the pressure plenum, and making installation of lighting and accessories clean and simple. A vinyl trim insert provides an attractive, secure seal for mains where no attachments are installed. The insert may be removed, trimmed, or relocated as additional equipment is installed or relocated. Consider this laborsaving, value added solution when reviewing your unique cleanroom design requirements.

Additional Information

Additional Information

N/A
  • All systems are non-progressive, and can be factory-fabricated to specified grid module sizes.
  • Standard grid members can be provided with either clear anodized or powder coat white finish.

Our Philosophy

Creative thinking may mean simply the realization that there’s no particular virtue in doing things the way they always have been done
~Rudolf Flesch

About Us

© 2018 Technical Equipment Sales. All Rights Reserved | Site created by Thomas Marketing Services